FLUKE-190 II 시리즈 (2,4채널)

2채널, 4채널 모델

CAT III 1000V / CAT IV 600V의 안전등급의 2채널과 4채널 스코프미터는 전례 없는 성능, 견고함, 휴대성을 겸비하였습니다. 

여러분은 주파수대역에 따라 60MHz, 100MHz, 200MHz, 500MHz 모델을 선택할 수 있으며, 최대 5GS/s 샘플링속도에 200 ps 분해능의 사양이며 IP51의 방수, 방진등급으로 먼지, 습기 등으로부터 보호됩니다. 

또한 교체 가능한 고성능 배터리가 필드 엔지니어를 위한 요구를 만족시켜 드릴 것입니다.

Feature

mV에서 kV까지 안전한 측정 전자 및 전기분야 사용을 위해 mV에서 kV까지 안전한 측정을 보장합니다. 독립 절연된 입력단은 접지단의 분리로 쇼트에 의한 위험을 방지합니다. IP51의 방진, 방수 등급 Fluke는 스코프 중 유일하게 IP51을 충족합니다. 봉인된 케이스는먼지, 습기 등으로부터 장비를 보호하여 여러분에게 항상 정확한기능을 제공합니다. 멀티미터 기능 탑재 ㆍFluke 190 II 시리즈의 2채널 모델은 절연된 2개의 스코프 입력단 외에 1개의 멀티미터 입력단을 제공 ㆍ탑재된 5000카운트 멀티미터 기능으로 전압,저항,도통,다이오드 측정이 가능 ㆍ전류및 온도측정은 추가 션트, 프루브, 아답터가 필요 ㆍ4채널 모델은 4개의 BNC 단자로 4개의 미터를 동시에 사용하는 효과를 가집니다. 단 한번의 충전으로 모든 작업을… 새로운 고성능 Li-ion 배터리의 사용으로 7시간까지 사용할 수 있으며 배터리 커버를 분리하여 편리한 배터리교체가 가능합니다. USB를 이용하여 손쉬운 파형 캡쳐 및 공유 절연된 2개의 USB 포트로 PC나 USB 메모리에 손쉽게 저장할 수 있습니다. 파형, 스크린샷, 장비설정을 USB 메모리에 저장하십시오. USB를 이용하여 PC에 연결하면 FlukeView 소프트웨어를 이용한측정데이터 전송 및 분석이 가능합니다. Connect-and-View 트리거를 이용한 안정적인 디스플레이 Connect-and-View는 신호패턴을 분석, 자동으로 트리거를 설정합니다. 따라서 모터 구동신호를 포함하여 거의 모든 신호를 안정적이고 신뢰성 있게 디스플레이 합니다.       ScopeRecord 기능으로 48시간 동안 파형을 레코딩 UPS, 전원공급장치, 모터시동과 같은 이벤트 저장합니다. Stop-on-Trigger mode로, 스코프미터는 자동으로 전원결함을 인식하여 파형 데이터를 저장합니다. 줌기능으로 미세한 부분까지 확인할 수 있습니다. TrendPlot 기능으로 16일까지 측정값을 레코딩 최대 16일까지 최대, 최소, 평균값을 플로팅 4개의 입력단에 대해 전압, 전류, 온도, 주파수, 위상을 시간, 날짜와함께 플로팅

• SPEC
• DATA SHEET

• Specifications
  Bandwidth	Fluke 190-502: 500 MHz Fluke 190-204: 200 MHz Fluke 190-202: 200 MHz Fluke 190-104: 100 MHz Fluke 190-102: 100 MHz Fluke 190-062: 60 MHz
  Number of Channels	Fluke 190-502: 500 MHz: 2 channels Fluke 190-204: 200 MHz: 4 channels Fluke 190-202: 200 MHz: 2 channels Fluke 190-104: 100 MHz: 4 channels Fluke 190-102: 100 MHz: 2 channels Fluke 190-062: 60 MHz: 2 channels
  Real-time sample rate	Fluke 190-502: 5 GS Fluke 190-204: 2.5 GS/s Fluke 190-202: 2.5 GS/s Fluke 190-104: 1.25 GS/s Fluke 190-102: 1.25 GS/s Fluke 190-062: 625 MS/s
  Inputs	4 scope or 2 scope plus DMM input
  Independently floating isolated inputs	Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
  Timebase range	2 ns – 2 min/div (190-20X, 200 MHz models)5 ns – 2 min/div (190-10X, 100 MHz models)10 ns – 2 min/div (190-062, 60 MHz model)
  Input sensitivity	2 mV-100 V/div
  Trigger types	Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
  Trigger Source	Any scope input channel, or external via DMM input on 190-XX2, 2 channel models
  Glitch capture	8 ns
  Scope measurements	Cursor: 7 Automatic: 30
  Maximum record length	ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input
  Persistence	Digital persistence giving analog oscilloscope-like waveform decay
  Waveform Compare	Waveform reference with automatic Pass/Fail testing

   

  DMM Specification (2-channel models)
  Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)	4 mm banana inputs, fully isolated from scope inputs and from scope ground
  Maximum Resolution:	5000 counts
  Measurements:	Vdc, Vac rms, Vac+dc rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature ºC or ºF (using optional converter)
  Memory	190-XX2, 2 Channel Screen + Setup: 30 Recording: 10
  Display	153 mm full color LCD with fast update rate

   

  Environmental Specifications
  Operating Temperature	0ºC to 40ºC Including Batteries0ºC to 50ºC Excluding Batteries
  Storage Temperature	-20°C to +60°C
  Operating Altitude	Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 VUp to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V

   

  Safety Specifications
  Electrical Safety	1,000V CAT III/600V CAT IV (EN61010-1)

   

  Mechanical & General Specifications
  Size	270 x 190 x 70 mm
  Weight	2.2 kg
  Warranty	3-years on main instrument, 1-year on accessories
  Li-Ion Battery	190-XX2, 2 Channel models 190 BP291 4800 mAh battery up to 7 Hours included standard

   

  Included Accessories
  Two channel models	VPS410 Voltage Probe Sets (one red, one blue) TL175 TwistGuard™ safety designed Test Lead Set (red and black) BC190 Battery Charger/mains Adapter BP290 2400 mAh Li-ion Battery Handstrap (affixed to instrument) Hangstrap Multi-Language User Manuals on CD-Rom FlukeView ScopeMeter demo package (restricted functionality) USB Interface Cable
  Four channel models	VPS410 Voltage Probe Sets (one red, one blue, one grey, one green) BC190 Battery Charger/mains Adapter BP291 4800 mAh high capacity Li-ion Battery Handstrap (affixed to instrument) Hangstrap Multi-Language User Manuals on CD-Rom FlukeView ScopeMeter demo package (restricted functionality) USB Interface Cable
  Warranty	Three years on main instrument, one year on accessories

   

• ScopeMeter Family Brochure

  190 Series II_Technical Data

  190_104_umeng0000

  F190II(4채널) 메뉴얼(한글)