ZNL Vector Network Analyzer

FEATURE
Measurement equipment for RF applications must fulfill high quality standards. Instruments should be easy to use and offer a high versatility. Fast measurements and reliable performance are crucial. With the R&S®ZNL, Rohde & Schwarz exceeds these expectations and offers even more: vector network analysis, spectrum analysis and power meter measurements are unified in one single, compact instrument making the R&S®ZNL a universal all-rounder.   (요약하자면 ZNL 네트웍분석기는 고성능의 벡터네트웍분석기이면서도 스펙트럼분석기도 사용할 수 있고, RF파워미터로도 사용할 수 있는 다기능 장비란 내용입니다)

옵션으로 가방이 있다는건 휴대가 가능하다는 의미

물론 배터리 옵션도 있습니다

파워센서 구매하시면 파워미터로도 사용할 수 있어요

  • 특 징

    • Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
    • Two-port vector network analyzer for bidirectional measurements
    • Universal instrument concept:
      • Vector network analyzer
      • Fully integrated spectrum analyzer option (for R&S®ZNL3)
    • Display of power meter measurements
    • Wide dynamic range of typ. 130 dB
    • Output power range from –40 dBm to typ. + 3 dBm
    • Measurement bandwidths from 1 Hz to 500 kHz
    • Fast measurements, i.e. 16.7 ms for 401 points (100 kHz IFBW, 200 MHz Span, 2-port TOSM (SOLT))
    • Compact size and low weight (6 kg to 8 kg)
    • Optional battery pack available
    • Windows 10® operating system
  • Network analysis
    Frequency range R&S®ZNL3 5 kHz to 3 GHz
    R&S®ZNL6 5 kHz to 6 GHz
    Dynamic range >120 dB (spec.); typ. >130 dB
    Output power 0 dBm (spec.); typ. + 3 dBm
    Trace noise <0.0035 dB (spec.); typ. < 0.0005 dB
    Measurement speed
    Sweep time 401 points, 2-port TOSM, 200 MHz span, 100 kHz IFBW 16.7 ms
    Data transfer
    IEC/IEEE, 201 points typ. 3 ms
    HiSLIP over 1 Gbit/s LAN typ. 2.5 ms
    Measurement parameters Sxy; wave quantities, ratios, impedance parameters (Zxy); attmitance parameters (Y); stability factors
    Display graphs dB mag, phase, Smith, polar, SWR, unwr phase, lin. mag, inv. Smith, real, imag, delay
    Calibration procedures reflection normalization open or short, reflection OSM(OSL), enhanced reflection normalization OM or SM; transmission normalization (response calibration), transmission normalization both (response calibration), one path two ports, TOSM (SOLT)
    Measurement data points VNA mode 1 to 100 001
    SA mode 101 to 100 001
    IFBW 1 Hz to 500 kHz, in steps of 1/1.5/2/3/5/7
    Spectrum analysis
    Frequency range R&S®ZNL3-B1 5 kHz to 3 GHz (resolution 1 Hz)
    Displayed average noise level (DANL) RF attenuation 0 dB <-140 dBm (spec.); typ. <-150 dBm
    Phase noise 1 GHz, 10 kHz offset <-103 dBc (1 Hz); <-108 dBc (1 Hz)
    Max. signal analysis bandwidth with option R&S®FPL1-B40 40 MHz
    Intermodulation
    Third-order intercept point (TOI) 300 MHz ≤ fin ≤ 3 GHz >16 dBm (spec.); typ. >20 dBm
    Second harmonic intercept (SHI) 900 MHz ≤ fin ≤ 1.5 GHz 70 dBm (nom.)
    General data
    Limit lines VNA mode single, segmented, upper limit, lower limit
    Channels within one VNA setup no limitation
    Channel setups max 14 setups
    Traces VNA mode no limitation
    SA mode 6
    Markers VNA mode 10 + ref. marker (per trace) SA mode
    SA mode 16
    Operating system Windows 10
    Display 26.4 cm (10.1″), diagonal WXGA color LCD with touchscreen
    Dimensions (W × H × D) 408 mm × 186 mm × 235 mm (16.06 in × 7.32 in × 9.25 in)
    Weight depending on configuration 6 kg to 8 kg (13.23 lb to 17.64 lb)
  • ZNL_DATASHEET
    ZNL_브로셔